Led Indicator Details - Toshiba Strata CIX IP5000-UG-VB User Manual

LED Indicator Details

Each line and Programmable Feature Button has a LED next to it which indicates the
status of the line or feature associated with the button. Line LEDs light red or green
and flash at varying rates to indicate call status (see
Table 6 LED Indicators
LED
Extension In-Use
(access outside line)
Incoming Call
(while ringing)
Hold (outside line) If using
Grp
, the hold indication is only at the
station that places the call on hold.
Hold — Consultation
(during consultation/transfer to another
station)
Hold — Exclusive (outside line)
Hold — Recall
(when held call recalls your idle station)
Hold — Exclusive Recall
Internal Call
(while station ringing)
Busy Station Transfer
(outside call transferred to your busy
station from a designated station or AA)
After disconnecting first call...
Conference
Note LEDs on the telephone flash at different speeds depending on the function
performed. Flash rates can be found under
Strata CIX IP5000-series Telephone UG
Your Station (Green)
Interval Rates
2 seconds On, 1/8 second Off
– 1/8 second On/Off
1 second on at 10 pulses/
second –1 second Off
Pooled Line
4 pulses/second for 1/8
second On/Off
10 pulses/second
10 pulses/second
1 second at 2 pulses/second, 
1 second at 10 pulses/second
1 second at 2 pulses/second, 
1 second at 10 pulses/second
Your extension button flashes
10 pulses/second–1 second
Off
4 pulses/second, 1/8 second
On/Off
10 pulses/second
10 pulses/second
04/09
Table 6).
Other Station (Red)
steady
one second On/Off
1/2 second On/Off
steady
steady
flashes
steady
[SDN] red flashing or
green ringing
3/4 second on, 1/8
second Off
2 pulses/second
steady
"LED Indicator Details" on page
The Basics
Message Waiting
29.
29