Toshiba Strata CIX IP5000-UG-VB User Manual page 165

GRQ Port Number
1. From IP Configurations > Advanced > GRQ Port.
The current GRQ Port Number displays (shown
right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change
and go to the Advanced Setting screen.
Note For other notes, refer to
RRQ Port Number
1. From IP Configurations > Advanced > RRQ Port. The
current RRQ Port Number displays (shown right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change
and go to the Network Setting screen.
Note For other notes, refer to
Application Server Address
1. From IP Configurations > Advanced > AP Addr. The
current Application Server Addr screen displays
(shown right).
Note The Application Server Address can be an IP
Address or a URL (alphanumeric). See
Alphanumeric Characters" on page 148
URL.
2. Follow the steps
page 140. Also see
additional information.
Strata CIX IP5000-series Telephone UG
"Station ID" on page
"Station ID" on page
"To change settings on the screen" on
Table 21 on Page 148
04/09
Administrator Programming
GRQ Port Address
0
Backspace = Vol-Down
[Set]
142.
RRQ Port Number
0
Backspace = Vol-Down
142.
[Set]
Application Server Addr
192.168. 0. 235
"Dial Pad
Backspace = Vol-Down
to enter the
[Set]
for
IP5131-SDL Settings
:Current
:New
[Cancel]
Config
:Current
:New
[Cancel]
Config
:Current
:New
[Cancel]
Config
147