Advertisement
Transformer Wireless Remote Control Handle:
In the current Transformer models covered by this manual (Version 2.6), the
control handle is now detachable, and becomes the new remote control unit.
Simply remove the "D-Clip" and the handle can be removed from the mounting
tube.
Please note: Due to shipping regulations, the battery inside the control handle is
not connected. The handle cover is packaged separately inside the box.
Also, again due to shipping regulations and safety, the included lithium battery is
only charged to about 30% capacity, so it will need to be charged before first use.
The control handle will need to be assembled as follows:
⦁
Connect the charger cable as shown below. Please note that there is a
notch in the charger connector to ensure proper polarity.
7
Advertisement
