Advertisement
Important: to make sure the top and bottom holes line up, we recommend
drilling through the top and bottom guide holes separately.
Once both holes are drilled, insert the locking D-Clip to secure the
stabilizer bars.
⦁
Plug the trailer brakes into the unit, and turn on the power switch.
⦁
You are now ready to move your trailer!
Bumper Receiver Set-up
The movement for of the receiver is designed for the fifth wheel
application in order to provide optimum stability. When using the
receiver for ball mount purposes Follow the instructions below
which will allow you to lock the receiver in place ensuring there
is no movement.
21
Advertisement
