Velleman BDET1 Firmware Update page 3

5. When the program is open, enlarge the window to see the "Program" button (at the far right).
6. Click the "LoadFile" button.
7. On your PC, browse to the folder where you unzipped the downloaded files and locate the file
"LCD_H02_Euro+GBP.EUP", then click "Open".
8. When the file is open, click the "Program" button.
The firmware is now loading into the BDET1.
Caution! Do not disconnect the power cable or shut down the device, because this will
damage the BDET1.
When the new firmware is installed, the BDET1 reboots automatically and the display will show "H02" during
start-up.
V. 02 – 12/06/2013
BDET1
3 ©Velleman nv