Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba TV 27A42 Owner's Manual

Adding channels to the TV's memory

Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.

Programming channels automatically

Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press or until the TV/CABLE
selection is highlighted.
3. Press or to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press to select CH PROGRAM.
5. Press or to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED
(channel or cable number)" appears.
7. Press Channel or

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press
to display the SET UP menu.
3. Press or to highlight ADD/
ERASE.
4. Press or to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.

Changing channels

To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel + or – on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
3L51601C/E P15-24 15
or to display the SET UP menu.
CH
PICTURE AUDIO SET UP OPTION
TV / CABLE TV CABLE
CH PROGRAM START
ADD / ERASE ADD
SELECT ADJUST
to view the programmed channels.
or
CH
PICTURE AUDIO SET UP OPTION
TV / CABLE TV
CH PROGRAM START
ADD / ERASE ADD ERASE
SELECT ADJUST
15
POWER
TV VCR CABLE
CH RTN
1 2 3
4 5 6
7 8 9 0
CH +
Channel +/–
VOL VOL
– +
MENU/
ENTER
Menu
CH –
EXIT RECALL TV/VIDEO FAV
Exit
RESET CAP/TEXT 1/2 FAV
CODE MTS SLEEP MUTE
POWER
TV VCR CABLE
CH RTN
1 2 3
Channel
4 5 6 Numbers
7 8 9 0
CH +
Channel +/–
VOL VOL
– +
MENU/
ENTER
Menu
CH –
EXIT RECALL TV/VIDEO FAV
Exit
RESET CAP/TEXT 1/2 FAV
CODE MTS SLEEP MUTE
4/6/2002, 13:08