Advertisement
Steam to Steam Humidifier
SKS Series
Maintenance Procedure Instructions
SKS Steam to Steam Humidifier Maintenance Procedure Instructions-150303
Advertisement
Table of Contents
Related Manuals for Neptronic SKS Series
Summary of Contents for Neptronic SKS Series
- Page 1 Steam to Steam Humidifier SKS Series Maintenance Procedure Instructions SKS Steam to Steam Humidifier Maintenance Procedure Instructions-150303...
- Page 2 Open the cover using the two thumb screw on each side of the unit while the humidifier is being drained. There are two covers on the humidifier. A painted cover that is on the top and a stainless steel cover beneath www.neptronic.com Page | 1...
- Page 3 SKS Steam to Steam Humidifier Maintenance Procedure Instructions Open the stainless steel cover using a wrench tool (supplied by Neptronic) to unscrew the latches. Wait till the water level reaches the drain pump hole after opening the cover. Stop the drain cycle by pressing Drain button as soon as the water level reaches the drain pump hole.
- Page 4 Perform the following steps for strainer maintenance: Stop steam supply to the strainer line. Unscrew the meshing cap. Meshing Cap Clean the meshing from any debris. Reassemble the meshing in the strainer body using the cap. Reopen steam supply to steam line. www.neptronic.com Page | 3...
Need help?
Do you have a question about the SKS Series and is the answer not in the manual?
Questions and answers