Decoder Rear - Teufel decoderstation 3 Technical Specifications And Operating Instructions

Function: Decoder rear
Optical 2
For connecting the decoder with a digital signal
source in optical format(Toslink). The decoder-
station 3 is supplied with a suitable optical cable.
Coaxial
For connecting the decoder with a digital signal
source in coaxial format(cinch).
Aux 1 · Aux 2 · Aux 3
You can connect the stereo cinch cable(left
/right) to connect with the analogue outputs
of your stereo reproduction appliances(e.g. TV
set, CD player, video recorder etc.). You will need
an extra preamplifier to connect and operate a
record player.
5.1-Channel Output
A decoded analogue multi-channel sound signal
is emitted via an analogue 5.1-output. Alterna-
tively you can also use the output for the left
and right front channels for reproduction in
stereo. A cinch cable is required per channel to
connect to an external appliance(e.g. a subwoof-
er with multi-channel input), i.e. a total of six
mono cinch cables or three stereo cinch cables.
FL: Sound output of left front channel
FR: Sound output of right front channel
SL: Sound output of left surround channel
SR: Sound output of right surround channel
C: Sound output of centre channel
SW: Subwoofer output
(The subwoofer output reproduces the frequen-
cy area below 130Hz).
AC input
For connecting the power pack supplied. Use the
screw fastening to prevent it from slipping out.
Specification of the
connections on the back
of the decoderstation 3
and their functions.
Teufel· decoderstation 3
9