Information on spare parts: Lautsprecher Teufel will provide in any event. Additional active cooling of the appliance is instructions for use, generally not permitted.
Page 5
Lautsprecher Teufel decoderstation 3 Dear Lautsprecher Teufel customer, Thank you for buying the decoderstation 3 from Lautsprecher Teufel. You have bought a very high quality decoder, because Teufel appliances are fitted with high quality components and have been carefully made.
You can connect the decoderstation 3 to a For your own benefit we recommend that you coaxial digital outlet do not dispose of the box, in order to guarantee...
3 not only allows you to switch between different signals, but can also give The decoderstation 3 is an ideal appliance for them e.g. DSP effects to optimise the surround anybody who wants to operate a fully function- sound experience of stereo sources.
Function: Decoder front / display Description of display and Display operating elements on the The decoderstation 3 display is on the front top front of the decoderstation 3. edge. Various adjustment parameters can be shown on this two-figure display. During operating, the display always shows the signal source –“O1”...
Optical 2 Specification of the connections on the back For connecting the decoder with a digital signal of the decoderstation 3 source in optical format(Toslink). The decoder- and their functions. station 3 is supplied with a suitable optical cable. Coaxial For connecting the decoder with a digital signal source in coaxial format(cinch).
Page 10
Reproduction of AC-3(Dolby Digital) is only pos- sible with digital sources(i.e. optical 1/2 or coax). For reproduction in DTS for appropriately coded sound tracks. Please note: Reproduction of DTS is only possible with digital sources(i.e. optical 1/2 or coax). Teufel · decoderstation 3...
Time delay setting options for the centre loud- speaker(only effective in Dolby Digital/dts mode). Inserting or changing the batteries. With the decoderstation 3, all of the settings L(left)· R(right)· Balance can be made simply by remote control. Activate The buttons “L” and “R” reduce the respective the decoder using the “standby”...
TV set can also be oper- CD player/recorder * ated on AUX 1 (example: video recorder). MP3 player * Active subwoofer with 5.1 input Games console Power pack Connection to optical 1 on the front of decoderstation 3. Teufel · decoderstation 3...
Use an optical digital cable(Toslink) to con- nect appliances with optical digital output. The decoderstation 3 comes with a cable of this type. Before connecting the optical digital cable you must first remove the protective cap of the optical fibre on the cable and on the connection jacks.
The “centre delay” and is sufficient. Make sure you are in the best and most central “rear delay” settings on the decoderstation 3 place possible for listening. Press the “standby” remote control are used to make these settings.
Xbox 360 and Playstation 3 and a few sound loudspeaker kit to the decoderstation 3.” cards with Dolby® Digital Live support are able The decoderstation 3 is a 5.1 decoder and is to carry out real time encoding. therefore not able to decode a sixth channel (rear).
Page 16
Please contact our service department if you have any questions, suggestions or if there is anything you think we could do better. Lautsprecher Teufel GmbH Gewerbehof Bülowbogen · Bülowstraße 66 10783 Berlin · Germany Tel.: +49(30) 30 09 30 0 Fax: +49(30) 30 09 30 30 www.teufel.eu...
Need help?
Do you have a question about the decoderstation 3 and is the answer not in the manual?
Questions and answers