Teufel decoderstation 3 Technical Specifications And Operating Instructions page 10

Function: Remote control
Standby
Switches the decoder from active operation into
standby mode(press once) or back into active
operation(by pressing again). Standby mode is
displayed when the standby LED lights up on the
decoder station.
Mute
Immediately mutes the decoder. Pressing the
button once mutes the system immediately.
Pressing it again switches the decoder to the
Dolby PLII Dolby Digital
previously selected level.
Optical 1
Selects the optical digital input on the front of
the decoder as a reproduction source.
Optical 2
Selects the optical digital input on the rear of
the decoder as a reproduction source.
Coax
Selects the coaxial digital input on the rear of
the decoder as a reproduction source.
Aux 1 · Aux 2 · Aux 3
These buttons each select one of the three
analogue inputs on the rear of the decoder as a
reproduction source.
Dolby PLII
Using this button you can reproduce analogue
stereo reception in Dolby Prologic II-5.1 mode.
Dolby Digital
For reproduction in Dolby Digital for appropri-
ately coded sound tracks. Please note:
Reproduction of AC-3(Dolby Digital) is only pos-
sible with digital sources(i.e. optical 1/2 or coax).
DTS
For reproduction in DTS for appropriately coded
sound tracks. Please note: Reproduction of DTS
is only possible with digital sources(i.e. optical
1/2 or coax).
Teufel · decoderstation 3
10