LENCO DAR-012 User Manual page 8

Dab+ fm radio with bluetooth

Hide thumbs Also See for DAR-012:

Available languages

Listening to the DAB

- Press the "FUNCTION" button until the display shows "DAB Mode"

- Press and hold "SCAN" to search radio stations automatically and the stations found

will be stored in a DAB program list. The first stored station will be played after the

scan is completed. Use the "TUNING" knob to select one of the stations stored in the

program list.

Press "INFO" to check information in DAB program:

Text Information, "Playing" appears if nothing is to be shown;

Signal strength;

Program type, "No PTY" appears if nothing is to be shown;

Radio station name;

Station Frequency. Example: 5A 174.928MHz;

Signal error;

Bit rate and radio frequency, such as 192kbps/DAB+;

Radio Station Time, "No Time" appears if nothing is to be shown;

Radio Station Date, "No Date" appears if nothing is to be shown;

Press "MENU" to enter DAB menu, turn "TUNING" to set:

<Manual tune>manual tuning: can be used to search manually for a specific

frequency. Turn the "TUNING" knob to select the requested frequency and then press

the "TUNING" knob to use the selected frequency.

<Prune> Remove invalid radio stations from the DAB channel list.: which means

delete Stations without signal after a full scan

<System> System setting: (See Submenu options below)

<Language> DAB system language: Press "TUNING" knob to select language, default

is English. There are 4 languages, you can choose: Deutsch, Italiano, Francais ,

Portuguese; The selected language has a "*" mark

<Factory Reset> Full reset to factory settings: Press "TUNING" knob to reset. Note:

After factory reset, the default mode is DAB radio.

<SW Version> Will show the actual firmware version

DAB Programming:

Preset Store: Station storing: Press and hold the "P.SET" button to enter the "Preset

store" modus. Use the "TUNING" knob to select the desired preset location. The unused

presets will have (empty) displayed. You can overwrite an existing or empty preset by

selecting it and pressing the "TUNING" knob.