Replacing The Fuse; Cleaning Recommendations - Promax FP-2b User Manual

USER'S MANUAL FP-2b
R
5.3 eplacing the
- Disconnect the test leads and turn off the multimeter, remove
screws on the back cover and open the case.
- Check if the fuse is melt, if necessary replace it with a new one
of the following characteristics:
- Place and fix the lid again.

5.4 Cleaning recommendations

Do not use scented hydrocarbons or chlorized
solvents. Such products may attack the plastics used
in the construction of the cover.
The cover should be cleaned by means of a light solution of
detergent and water applied with a soft cloth.
Dry thoroughly before using the system again.
Page 14
f
use
200 mA, F, 250 V
CAUTION
Janvier 2001