Connecting A Camcorder; Connecting An Audio System - Toshiba 43A61 Owner's Manual

Connecting a camcorder

This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one pair of audio cables
• one video cable

Connecting an audio system

This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see" Turning off the built-in speakers"
on page 42).
You will need:
• one coaxial cable (may be provided by your cable company)
• one pair of audio cables
Amplifier
LINE IN
L
TV
S-VIDEO
VIDEO
L/ MONO
AUDIO
R
VIDEO 1 VIDEO 2
IN
Camcorder
VIDEO AUDIO
OUT
L
R
TV
R
)
AUDIO CENTER ANT( 75
CHANNEL IN
ANT-1
ON OFF
OUT
OUT
VAR
R L
AUDIO
ANT-2
Y VIDEO
L/
L
P MONO
B
AUDIO AUDIO
P
R
R R
COLOR
STREAM
INPUT
DVD IN OUT
Note:
If you have an S-VHS camcorder, use an
S-video cable (in the S-video jacks) instead of
a standard video cable between the TV and
camcorder.
Do not connect a standard video cable and
an S-video cable to Video-3 at the same time
or the picture performance will be
unacceptable.
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Note:
To hear sound, the volume of both the TV and
the external audio amplifier must be set above
0 (zero).
11