Table of Contents
Advertisement
Selecting the woofer internal/external
mode
1
Press M, then press Y or y to display the SET UP menu.
Language
Auto tuning
Manual tuning
AV connection
Picture position
MENU
Back
EXIT
2
Press < or > to select AV connection, then press Q
to display the AV connection menu.
AV connection
PC/HDMI1 audio
HDMI1 audio
Woofer
Audio output
MENU
EXIT
Back
3
Press < or > to select Woofer, then press Y or y to
select Internal or External.
• Internal is to use the bass boost.
• External is to use an external woofer system.
Using the bass boost
1
Select the woofer Internal mode as shown above.
2
Press t to display Bass boost level.
Bass boost
3
While the Bass boost display is on the screen, press Y
or y to adjust the Bass boost level.
4
To turn off the Bass boost, press t to display Bass
boost Off.
Bass boost
Note:
The Bass Boost effect is active only when the sound outputs
from the speaker or an external woofer system.
Using an external woofer system
Connect an external woofer to the WOOFER output terminal
located on the rear of the TV (- page 25).
1
Select the woofer External mode from the AV
connection menu.
Press t to display External Woofer level, then press
2
Y or y to adjust the External Woofer level.
External Woofer
3
To turn off the External Woofer, press t to display
External Woofer Off.
External Woofer
Using the TV's features
SET UP
English
OK
OK
OK
OK
Watch TV
PC
Digital
External
Fixed
Watch TV
70
Off
70
Off
Selecting the audio output
With the audio output function "Variable", you can use the
TV's remote controller to adjust the sound volume of the
external audio system connected (- page 25).
To select the sound volume from AUDIO OUT
terminals:
1
From the AV connection menu, press < or > to select
Audio output.
2
Press Y or y to select Variable or Fixed.
Note:
Make sure the volume control of your audio amplifier is set to a
moderate listening level.
Other features settings
Selecting the timer menu
The Timer is especially useful if you want the TV to turn itself
on or off after a selected period of time.
1
Press M, then press Y or y to display the TIMER menu.
Sleep timer
On timer
On timer Position
MENU
EXIT
Back
2
Press < or > to select the required timer mode (Sleep
timer (Turn off the TV) or On timer).
The timer display will set by 10 minutes, up to 12 hours
and 50 minutes.
3
Press the Number buttons (0-9), Y or y to set the On or
Off delay time, e.g. on in 30 minutes and On timer
Position 3 selected.
4
Press P to exit the menu. When setting the On timer,
press < or > to select the On timer Position and enter
the program position number you want to watch. Set the
Standby mode by pressing J on the remote control or 1
on the TV.
Activation of the Timer is indicated by the green "On-
timer indicator", on the front of the TV (- page 8).
Notes:
• The TV will automatically turn itself off after approximately 2
hours if you do not operate the TV after turned on by on timer
function.
• If you press and hold
Y
or
the timer display will set by 30 minutes, up to 12 hours 30
minutes.
TIMER
00:00
00:30
03
Watch TV
y
to set the On or Off delay time,
19
Advertisement
Table of Contents
