AEG FSB31600Z User Manual page 17

Problem and alarm code
The appliance stops and starts more
times during operation.
The program lasts too long.
Small leak from the appliance door.
The appliance door is difficult to
close.
Rattling/knocking sounds from inside
the appliance.
The appliance trips the circuit-beaker. • The amperage is insufficient to supply simulta-
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
11.1 The washing and drying results are not satisfactory
Problem
Poor washing results.
Possible cause and solution
• It is normal. It provides optimal cleaning re-
sults and energy savings.
• If the delayed start option is set, cancel the de-
lay setting or wait for the end of the count-
down.
• The appliance is not levelled. Loosen or tight-
en the adjustable feet (if applicable).
• The appliance door is not centred on the tub.
Adjust the rear foot (if applicable).
• The appliance is not levelled. Loosen or tight-
en the adjustable feet (if applicable).
• Parts of the tableware are protruding from the
baskets.
• The tableware is not properly arranged in the
baskets. Refer to basket loading leaflet.
• Make sure that the spray arms can rotate free-
ly.
neously all the appliances in use. Check the
socket amperage and the capacity of the me-
ter or turn off one of the appliances in use.
• Internal electrical fault of the appliance. Con-
tact an Authorised Service Centre.
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
Possible cause and solution
• Refer to "Daily use", "Hints and tips" and basket
loading leaflet.
• Use more intensive washing programmes.
• Clean spray arm jets and filter. Refer to "Care and
Cleaning".
ENGLISH 17