Samsung T260 Manual page 12

Tft lcd monitor

Hide thumbs Also See for T260:

4. T260 / T240 Connect i on ( 1)

1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the

monitor into a nearby outlet.

2. Connecting to the PC

2-1) Using the D-sub (Analog) connector on the video card : Connect the signal cable to the 15-pin, D-sub connector on

the back of your monitor.

2-2) Using the DVI (Digital) connector on the video card : Connect the DVI cable to the DVI port on the back of your monitor.

2-3) Connecting to Macintosh : Connect the signal cable to the 15-pin, D-sub connector on the Macintosh.

3. Turn on your computer and monitor. If your monitor displays an image, installation is complete.

※ You may get a blank screen depending on the type of video card you are using, if you connect simultaneously both the D-Sub

and DVI cables to one computer.

※ If you properly connect your monitor using the DVI connector but get a blank screen, check to see if the monitor status is set

analog. Press Source Button to have the monitor double-check the input signal source.

T240