Ez Mode - MSI Creator TRX40 Quick Start Manual

EZ Mode

At EZ mode, it provides the basic system information and allows you to configure the
basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.
A-XMP switch
OC GENIE 4
switch
Information
display
M-Flash
Favorites
Hardware
Monitor
∙ OC GENIE 4 switch - click to select the overclocking stage as you desire. Read the
abilities of OC GENIE 4 by clicking on the question mark in the right-bottom corner.
This function will only be available if the installed processor supports this function. To
disable OC GENIE 4, select 0.
⚠
Important
Please don't make any changes in OC menu and don't load defaults to keep the
optimal performance and system stability after activating the OC GENIE 4 function.
∙ A-XMP switch (optional) - click on the inner circle to enable/ disable the A-XMP.
Switch the outer circle to select the memory profile if any. This switch will only be
available if the installed processor and memory modules support this function.
∙ Setup Mode switch - press this tab or the F7 key to switch between Advanced mode
and EZ mode.
∙ Screenshot - click on this tab or the F12 key to take a screenshot and save it to USB
flash drive (FAT/ FAT32 format only).
∙ Search - click on this tab or the Ctrl+F keys and the search page will show. It allows
you to search by BIOS item name, enter the item name to find the item listing. Move
the mouse over a blank space and right click the mouse to exit search page.
⚠
Important
In search page, only the F6, F10 and F12 function keys are available.
∙ Language - allows you to select the language of BIOS setup.
∙ System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU
type, memory size, CPU/ DDR voltage, BIOS version and build date.
62
BIOS Setup
Setup Mode switch Screenshot
Language
System
information
Boot device
priority bar
Function
buttons