Viewing Movie Files (On Dlna Certified ™ Server) - Toshiba 40UX600U Owner's Manual

To set the Media Server Setup:
You only need to complete the Media Server Setup if
you want to memorize DMS to be woken up later by the
TV.
1
From the APPLICATIONS menu, highlight Media
Player, and then press
2
Press B or b to highlight Setup, and press
3
Press B or b to highlight Media Server Setup, and
press . The list that contains the currently active
O K
DMSs and the registered DMSs will appear.
4
Press B or b to select the desired device, and press
. A check will appear in the box. To remove the
OK
check, press again.
OK
5
Press c to highlight Done, and then press
Note:
• The setting is not saved when
Done is pressed.
• Up to 8 DMSs can be selected.
• Even if the device checked is power-off, it is displayed
but grayed out in the Select Device window. When
pressed on a highlighted grayed out item, a confirmation
of Wake-on-LAN is displayed. The TV tries to wake up the
DMS if Yes is pressed. The Server will start if it supports
Wake-on-LAN feature.
• Depending on Media Server, it may not start even if
Wake-on-LAN is sent.
• When some DMSs are connected, it may take time until
the list is displayed. The list may be smoothly displayed
by the following operation.
- The device selection window is closed once and it is
displayed again.
- The RED button is pressed.
Chapter 8: Advanced features
.
OK
.
OK
.
OK
is pressed before
RETURN
is
OK
Viewing Movie files
(on DLNA CERTIFIED
Basic Playback:
1
After selecting a file (- "To select a file in the list of
contents" on page 76), press
playback.
Note:
• When you highlight the file without pressing
content is played on a preview screen. When
pressed, it is played in the full screen mode.
• Depending on the file size, it may take some time to
start playback.
2
Press D to stop playback.
3
If playback finishes before D is pressed, the screen
will return to the list.
Note: When the repeat mode is set to All, the next file
will start playing automatically.
To pause playback:
Press A during playback.
To resume normal playback, press S.
Note:
• You can move to the desired replay position by pressing
C or c during PAUSE.
• PAUSE or operations during PAUSE may not be able to
operate depending on contents, DMC or DMS.
To play in fast reverse or fast forward directions:
Press H or J during playback. Each time you press
the H or J, the playback speed will change.
•H: Fast reverse playback
•J: Fast forward playback
To locate a specific file:
Press F or G repeatedly to access the desired file.
•F: Playback starts from the beginning of the current
file. When you press twice quickly, playback starts
from the beginning of the previous file.
•G: To locate subsequent files.
Note:
• If the previous or next file is not compatible, it will be
skipped automatically.
• When the TV is used as a DMR, this feature is not
available.
• These features may not be able to be operated
depending on the contents, DMC or DMS.
™
Server)
or S to begin
OK
, the
OK
is
OK
77