Table of Contents
Advertisement
Connecting a HDMI audio system
HDMI audio system is available if your AV amplifier
corresponds to ARC.
You will need:
•HDMI cable
AV amplifier corresponding to ARC
TV back panel
HDMI's ARC (Audio Return Channel) feature
This feature enables the audio signal of the TV to be sent
to the AV amplifier via the HDMI cable. It will not be
necessary to connect a cable from the audio output of
the TV to the audio input of the AV amplifier to
reproduce the audio received from the tuner of the TV
through the AV amplifier.
Chapter 2: Connecting your TV
Connecting a digital audio system
The TV's DIGITAL AUDIO OUT terminal outputs a
Dolby
®
code modulation) signal for use with an external Dolby
Digital decoder or other external audio system with
optical audio input.
You will need:
•Optical audio cable (Use an optical audio cable that
has the larger "TosLink" connector and not the
smaller "mini-optical" connector.)
HDMI
cable
Before controlling the audio:
•See "Selecting the optical audio output format" (-
page 62).
Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may not
work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS
NOT COVERED BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.
• The Dolby Digital format is available in the following
situations:
- When tuned to a digital RF channel or HDMI input.
- When DLNA Certified products or VUDU is used.
Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are trademarks of Dolby
Laboratories.
Digital or 2-channel down-mixed PCM (pulse-
Dolby Digital decoder or other
digital audio system
Optical
LINE IN
Audio IN
L
R
TV back panel
Optical
audio
cable
19
Advertisement
Table of Contents
