Setting Up The Network; Wireless Setup - Toshiba 40UX600U Owner's Manual

Using under wireless LAN environment:
Note:
• It is recommended to use IEEE 802.11a or IEEE 802.11n
on 5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for HD
video streaming.
• It is recommended that the encoding rate of content of
Video streaming is 20 Mps or less.
• It is not recommended to use 2.4 GHz for audio and
video streaming.
• Content playback may be interrupted by surrounding
various interference.
Chapter 8: Advanced features

Setting up the Network

You can select the Network Type.
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Network Type, and then
press C or c to select Wired or Wireless.
Note: If the Dual Band WLAN Adapter is not
connected, Wireless cannot be selected.
3
If you select Wired, see "Advanced Network Setup"
on page 67.
If you select Wireless, see the next column.

Wireless Setup

Note:
• This feature is grayed out when the Dual Band WLAN
Adapter is not connected or Network Type is set to
Wired.
• Continued connection of AP (Access Point) is not
guaranteed. The connection may be disconnected while
watching TV.
• Do not remove the Dual Band WLAN Adapter while
changing the settings of the wireless connection or
communicating.
There are 3 methods for wireless setup:
•Easy Setup (WPS)
If AP corresponds to WPS, this can be used.
– WPS (Wi-Fi Protected Setup
to execute connection of wireless LAN equipment
and setup of security easily. WPS will automatically
configure all wireless settings.
•Assisted Setup (setup by using AP's notification
information)
Network Name, Authentication, and Encryption are
decided based on information from AP. You manually
set Security Key.
•Manual Setup (to input all settings)
Easy Setup using PBC (Push Button Configuration)
1
From the PREFERENCES menu, highlight
Network Setup and press
2
Press B or b to highlight Wireless Setup, and press
.
OK
3
Press B or b to highlight Easy Setup, and press
4
Press C or c to select PBC.
5
Press b to highlight Start Scan, and press
6
Following the on-screen instruction, push the
appropriate button on your AP.
7
When a window reporting that the setup succeeded
appears, press
.
OK
™
) is standard designed
.
OK
.
OK
.
OK
.
OK
65