IBM e Server i Series Manual page 27

__ h. Connect the SPCN cable to connector J15.
__ i. Connect the power cable. Do not plug into the wall outlet.
__ j. Close or replace the back cover to your 0578.
__ 3. Connect the cables from your 0578 to your system unit.
__ a. Connect the HSL cable that is labeled 0 to the corresponding HSL
connector that you found in step 1c on page 16.
__ b. Connect the HSL cable that you labeled 1 to the corresponding HSL
connector that you found in step 1c on page 16.
__ c. Connect the SPCN cable that comes from your expansion unit to the
connector that is labeled J15.
__ 4. If you are installing a new iSeries server with this expansion unit, return to
the Cabling instructions.
__ 5. Go to Chapter 5, "Completing your installation" on page 27.
Chapter 3. Setting up your 0578 expansion unit
17