Getting Started - Honeywell Arm Mount Sled Quick Start Manual

Wearable solution for dolphin 70e black
Hide thumbs

Advertisement

Getting Started

The Arm Mounted Sled is a device that is used with the wearable version of
the Dolphin 70e Black (Honeywell Wearable Solution). For information about
the Dolphin 70e Black, refer to the quick start packaged with the terminal.
This document is designed to assist the user who is wearing the wearable
Dolphin 70e Black on an arm.
Out of the Box
A typical Honeywell Wearable Solution arm mount accessory kit contains the
following items (may be packaged separately):
Arm mount sled
Arm band
Tethered ring scanner (optional)
Audio end cap, headset adapter cable and headset (optional)
Quick Start Guide
The Dolphin 70e Black terminal and other accessories are packaged
separately. Be sure to keep the original packaging in case you need to return
the Dolphin 70e Black or accessories for service.
Initial Use Overview
When preparing for initial wearable use, insert a fully charged battery and
follow the steps in this guide to assemble the wearable sled and mount the
assembly on an arm. When finished, loosen the arm band straps to remove
the assembly from the arm.
Subsequent Use Overview
For subsequent use, it may be necessary to remove the terminal from the sled
before changing the battery. Next reassemble the sled and mount the
assembly on an arm. When finished, loosen the arm band straps to remove
the assembly from the arm.

Advertisement

loading

  Related Manuals for Honeywell Arm Mount Sled

Table of Contents