Advertisement
brush, if brush head no longer fit properly.
Never use without a brush head.
• If the toothbrush handle is dropped, the
brush head should be replaced before the
next use even if no damage is visible
• Replace brush head every 3 months or
sooner if brush head becomes worn.
• Clean brush head properly after each use
(see «Cleaning recommendations» para-
graph). Proper cleaning ensures the safe
use and functional life of the toothbrush.
Important Information
• Your Oral-B toothbrush can be used
with your smartphone (find details
under «Connecting your toothbrush to
your Smartphone»).
• To avoid electromagnetic interference
and/or compatibility conflicts, deacti-
vate the radio transmission of your
toothbrush handle (5) before using it in
restricted surroundings, such as air-
crafts or specially marked areas in hos-
pitals.
• Deactivate radio transmission by simul-
taneously pressing the on/off (3) and
mode button (4) for 2 seconds until the
radio transmission display (7) goes off.
Follow the same procedure to reactivate
transmission again.
• Persons with pacemakers should
always keep the toothbrush more than
six inches (15 centimeters) from the
pacemaker while turned on. Anytime
you suspect interference is taking
place, deactivate the radio transmission
of your handle.
Description
1
Brush head
2
Smart Ring
3
On/off button
4
Brushing mode button
5
Handle
6
Brushing mode display
7
Radio transmission display
(with Bluetooth
8
Charge level display
®
wireless technology)
Accessories (depending on model):
9
Basic charger (with fixed cord)
10 Brush head holder
11 Brush head compartment with protec-
tive cover
12 Smart plug (power supply)
13 Charging stand (with detachable cable)
14 Smartphone holder (stand)
15 Travel case
Note: Content may vary based on the model
purchased.
Specifications
For voltage specifications refer to the bot-
tom of the charging unit.
Noise level: 68 dB (A)
Charging and Operating
Your toothbrush has a waterproof handle, is
electrically safe and designed for use in the
bathroom.
• You may use your toothbrush right away
or charge it briefly by placing it on the
plugged-in basic charger (9) or charging
stand (13). When using the charging stand
use the extra smart plug (12) provided (pic-
ture B). The smart plug may be used for all
global mains voltage ranges (100 -240V).
Note: In case the battery is empty (no
lights illuminated on charge level display
(8) while charging or no reaction when
pressing the on/off button (3)), charge at
least for 30 minutes.
• The charge level is indicated on the charge
level display (8). Flashing lights indicate
that the battery is charging (picture
once it is fully charged, the lights turn off.
A full charge typically takes 12 hours and
enables at least 2 weeks of regular brush-
ing (twice a day, 2 minutes).
Note: At a very low charge level, the lights
might not flash immediately; it can take up
to 30 minutes.
• If the battery is running low, a red light is
flashing on the charge level display and
the motor is reducing its speed. Once the
battery is empty, the motor will stop; it will
need at least a 30-minute charge for one
usage.
1
);
15
Advertisement
