Table of Contents
Advertisement
Labeling the video input sources
You can label each video input source according to the type of
device you connected to each source, from the following preset
list of labels:
– – (default label)
Cable
DTV
Satellite/DSS
VCR
Laser Disk
DVD
Audio Receiver
Compact Disc
Video Recorder
Hide (to hide an unused input in the Input Selection
window)
Note:
If you set up a cable box in VIDEO 1, that input will be labeled
automatically and cannot be relabeled until you remove the
device from the TV Guide On Screen
To label the video input sources:
1. Press MENU and open the Preferences menu.
2. Highlight Input Labeling and press ENTER.
3. Press yz to highlight the video source you want to label.
Preferences
Favorite Channels
Closed Caption Mode
CC1
Closed Caption Advanced
Input Labeling
Menu Language
English
Home CH Setup
Navigate
Back
Select
RTN
Input Labeling
Video 1
Video 2
ColorStream HD
HDMI
PC
ANT 2
Reset
#01E_056-064_27HL95
57
Black
(E) 27HL95 *Web 213 : 276
Chapter 8: Using the TV's features
®
setup.
Exit
EXIT
DVD
Cable
Hide
DTV
- -
- -
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
4. Press x • to select the desired label for that input source. If
a particular input is not used, you can select "Hide" as the
label, which will cause that input to be "grayed out" in the
input list and skipped over when you press INPUT on the
remote control.
5. To save the new input labels, highlight Done and press
ENTER. To revert to the factory default labels, highlight
Reset and press ENTER.
Input labeling example:
The screen below left shows the default Input Selection screen
(with none of the inputs labeled). The screen below right is an
example of how you could label the inputs if you had connected
a DVD player to VIDEO 1, Cable TV to VIDEO 2, and a
DTV set-top box to HDMI. Also note that the ColorStream
HD input is labeled "Hidden," which means that the input will
be skipped over when INPUT or TV/VIDEO is pressed.
Input Selection
Input Selection
ANT 1
0
ANT 1
1
Video 1
2
Video 2
3
ColorStream HD
HDMI
4
5
PC
6
ANT 2
0
6
-
/
INPUT
to Select
Input Selection screen
with no inputs labeled
To clear the input labels:
1. Press MENU and open the Preferences menu.
2. Highlight Input Labeling and press ENTER.
3. Highlight Reset and press ENTER.
05.9.12, 15:42
ANT 1
0
ANT 1
ANT 1
1
DVD
2
Cable
3
ColorStream HD (Hidden)
4
DTV
5
PC
6
ANT 2
0
-
6
/
INPUT
to Select
Input Selection screen with
all inputs labeled except input 3,
which has been hidden.
57
Advertisement
Table of Contents
