Table of Contents
Advertisement
Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
into one data packet and send to center server together. If adopt our default value, one
packet will be separated into more or more packets will be packed into one. If customer
can't calculate the suitable value, please contact our technical support engineer.
Times of reconnect：Times of DTU to connect with center server, default is 3. If trial
times is more than
after a moment power on again, and dial-up,reconnect center server till connect server
successfully.
Interval of reconnect：Interval time of wireless Router to reconnect with center server,
unit is second. When DTU connects with center server fails, if reconnect time is less
than
d times, it will reconnect center server within the appointed time.
configure
Interval of keepalive：Interval time of keepalive data sent timely to maintain link. Unit
is second. Default is 60s. Interval of keepalive time can't set too small, if so, it will
cause flow increasing. It also can't be too large, if so, device can be detected after long
time offline. Suggested value is 10S<X<120S
Self register packet ： When DTU establish connection with center server, DTU will
send registration information to center, if registration packet needs specific definition
Keepalive packet define：After DTU connect with wireless network, if there is no data
transmit
within a certain time, wireless network will disconnect with DTU automatically. In
order to
keep DTU connection with wireless network, it will send packet to data center from
time to
time. 。
Option：None
Option：Use Default
Option ： Self Define
own packet according to actual situation
Tel:+86 592 5901215
d "times of reconnect", Router will auto power down and
configure
Function introduction: don't send packet
Function introduction: use default 0xFE
Function introduction: Customer define their
72
web:www.caimore.com/emain.asp
Advertisement
Table of Contents
