Caimore CM3155R User Manual page 70

Xiamen Caimore Communication Technology Co.,Ltd
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
explanation of DTU parameter configuration to use COM/LINE port as DTU.
Picture 4-5-10
 Center Num： input number according to the number of center server , when there is only
1 center server, please input 1. When there are more center servers, please input the
corresponding number.
 Center IP address and port：When there is only 1 center server, please input 1 in "center
num", at this time, it only needs to
server IP and port into corresponding bars, read picture 4-5-10. If center server doesn't
use fixed IP address, but use domain name, please input domain name into
corresponding IP address bar. Center 1 Address Port ~Center 4 Address Port don't need
to input
When there are several center servers (main number is more than 1), input
corresponding center server number in "cent num", at this time, it needs to configurate
"Center 1 Address Port" ~ "Center X Address Port", X is number of center servers, input
all center server IP address and port to corresponding bars, read picture 4-5-10. If center
server doesn't use fixed IP address, but use domain name, please input domain name
into corresponding IP address bar. In this time,"Main center IP Address and Port"
doesn't need to input.
Tel:+86 592 5901215
"Main center IP and port", input center
configure
70 web:www.caimore.com/emain.asp