Amulet Hotkey DXZC Series Quick Start Manual

DXZC and DXZ4 series
PCoIP zero clients

Quick Start Guide

This guide is for all RJ45 and SFP zero clients: DXZ4, DXZ4-M, DXZ4-A, DXZ4-AM, DXZC, DXZC-M, DXZC-A, DXZC-AM, DXZC-E, DXZC-EM.
This guide is also for the card-reader models: DXZC-C, DXZC-M, DXZC-MC, DXZC-EC, DXZC-EMC, DXZC-AC and DXZC-AMC. All models are supplied with a PSU and power cable.
Note: This guide refers to all models as 'zero client' unless a model is specified. Pictures shown may vary from the model you have.
Before you start
Make sure a remote PCoIP host is available. Know the IP address or
DNS name of the physical host, or server address for virtual hosts.
STEP 1: Connect the Keyboard, Mouse and optional
Headphones (DXZ4, DXZC) or Headset (DXZC)
Note: DXZ4 model shown. DXZC models have two video ports and one network port.
STEP 2: Connect Monitors, Speakers,
Network and Power
1. Connect at least one monitor, SFP modules if
required, network cable and power supply (PSU).
Use only the PSU supplied with the unit.
2. Connect speakers (not supplied) if required.
STEP 3: Power on the unit
1. Press the POWER/MENU button.
2. Turn on the monitor(s).