United Spa Controls C5 Series Installation Manual & Users Manual page 13

T8-S Initial Configuration
Entering The T8-S Topside's Configuration Menu
Once you've gone over the code chart and have chosen the options
you want to set for each code, follow these instructions for entering the
programming mode and setting the options. There is a time-out delay, so
taking longer then 10 seconds between steps will cause the topside to
time-out and resume normal operation.
Step 1
Press & Hold
Step 2
Press & Hold
Step 3
Then press
While in the Configuration Mode
Press
Press
Or press
12
for ~15 seconds, until
the display will reads:
for ~15 seconds, until
the display will reads:
to see the first code:
to change the selected Option of the displayed Code
to cycle to the next Code
at any time to save any changes and
exit the Configuration Menu
Code 1 - Option 1