United Spa Controls C5 Series Installation Manual & Users Manual page 12

T8-S Configuration Code Chart
Code 1: Jet-1 Button Configuration
Option 1: Jet-1 button operates Hi-Speed Pump-1
Option 2: Jet-1 button operates Lo-Speed and Hi-Speed Pump-1 *
Code 2: Jet-2 Button Configuration
Option 1: Jet-2 button operates Lo-Speed Pump-1
Option 2: Jet-2 button operates Hi-Speed Pump-2
Option 3: Jet-2 button operates Lo-Speed and Hi-Speed Pump-2
Code 3: Aux Button Configuration
Option 1: Aux button used only for settings/programming
Option 2: Aux button operates Air Blower
Option 3: Aux button operates Hi-Speed Pump-3
Code 4: Power (Amperage) Configuration
Option 1: 50A Operation (No heat with Aux)
Option 2: 60A Operation (No power restriction)
Option 3: 50A Operation (No heat with P-2)
Option 4: 40A Operation (No heat with P-2, and Aux)
Option 5: 20A 120V Operation or 30A 240V Operation
(No heat with anything other then P-1 Lo-Speed)
Code 5: Heater Operation
Option 1: Electric Heater operates with Lo-Speed Pump-1
Filtration cycle operates Lo-Speed Pump-1 & Ozone
Option 2: Electric Heater operates with 24hr Circulation Pump
Filtration cycle operates Ozone
Option 3: Electric Heater operates with timed/auto Circ Pump **
Filtration cycle operates Circulation Pump & Ozone
Option 4: Electric Heater operates with 24hr Circulation Pump
Filtration cycle operates Lo-Speed Pump-1 & Ozone
* - Code 1 should only be set to Option 2 if there is a second jet pump in the spa. If there
is only one jet pump, the default should be left so the unit operates as described later in
this manual, where the Jet-1 button operates Hi-Speed, and the Jet-2 button operates
Lo-Speed (avoiding 'unused' buttons).
T8-S Initial Configuration
11