Table of Contents
Advertisement
T8-S Initial Configuration
T8-S Topside Configuration
Once the control box and topside have been properly installed, you can
power up the unit and program the topside for the control's desired
equipment and operational configuration.
The configuration instructions that follow are meant to be carried out by a
spa service professional!
T8-S Topside Configuration Menu & Codes
The topside has a configuration menu consisting of five codes that
configure what components the system will operate, and what maximum
amperage the system will operate at.
Each code has a number of options that the code can be set to. By default,
all codes are set to their first option (Option 1).
Use the code chart on the next page to figure out which options you'll need
to set for each code for the hot tub the control is being installed into.
Once you know what options all the codes should be set to, turn to the
pages that follow for instructions on entering the configuration programming
mode, and how to select the different options for each code.
10
Hide quick links:
Advertisement
Table of Contents
