Toshiba D-VR4XSU Owner's Manual page 57

Timer recording
NOTES:
• Recording starts a few seconds be-
fore the preset starting time.
Timer recording starts before the
preset time; one second for DVD, or
five seconds for VCR.
• You can playback the DVD during
the VCR timer recording. You can
also playback the VCR during the
DVD timer recording.
• You cannot record the DVD during
the VCR timer recording. You also
cannot record the VCR during the
DVD timer recording.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs and
other materials, is prohibited under
the Copyright Laws of the United
States and other countries, and
may subject you to civil and/or
criminal liability.
2H5-01 P53-59
11
When you enter the other program for the timer recording, re
peat the steps 3 to 10.
12
Press SETUP.
The Timer Record Set screen disappears and the display will
return to the normal screen.
13
Press TIMER REC. The timer indicator "
display and the unit stands by for recording.
Stopping the timer recording
After the timer recording has started, you can cancel the timer
recording (but continue recording), or stop recording completely if
you want.
To cancel the timer recording, press and hold TIMER REC for more
than 2 seconds. The timer indicator "
and recording continues. Press STOP to stop recording completely.
Checking or changing the timer recording
When you want to check the selected timer recording, follow the steps 1
and 2 of "Setting timer recording" on page 55 and display the Timer
Record Set screen.
To change the timer recording, select the program to be changed and
press ENTER. The program screen will appear. Do step 4 to step 10 on
page 56.
When you want to change the program after the timer recording has
started, stop the timer recording.
Cancelling the timer recording
Display the Timer Record List screen.
Select the program you want to cancel and press CANCEL. "Delete
selected Title. Continue?" will appears. Press
and press ENTER.The selected program will be erased from the Timer
Record List.
In case Timer programs overlap
Do not overlap timer programs as portions of the conflicting programs
will be lost. The first recording time has priority over the next recording
time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about
1 minute.
Program 1
Program 2
Program 3
Recording
Control Settings
57
" disappears from the display
or
8 : 00 9 : 00 10 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.1 Prog.2 Prog.3
7/25/05, 23:21
" will appear on the
to select "Yes"
11 : 00
57