Setting The Video; Tv Screen; Display (Turning The Screen Display "On" Or "Off") - Toshiba D-VR4XSU Owner's Manual

Various settings
General Settings / Setting the Video
Daylight Saving Time
You can set the clock to daylight saving time automati-
cally or manually.
To select daylight saving time, select "Daylight Saving
Time" and select "On", while to cancel the daylight sav-
ing time, select "Off".
On: For manual setting (forward 1 hour)
Off: For manual setting (back 1 hour)
Auto: For automatic setting (read XDS in the signal)
NOTES:
• When you want to set the Daylight Saving Time manu-
ally, on the first Sunday in April you set it to "On", and
on the last Sunday in October you set it to "Off".
• When the clock is not set, the daylight saving time
setting is not available.
• When there is no daylight saving time in your area,
always select "Off".
Manual
You can manually set the date, year and present time
with the remote control.
1
Press or to select "Manual" and press
ENTER.
2
Select the desired items using
date, year, hour, and minute), then press
set the value of the selected item.
3
Repeat step 2 to set the date, year, present time
and Daylight Saving Time. Press ENTER. The Setup
Menu will close.
This completes clock time setting.
26
2H5-01 P22-30
or (month,
or to
26
This section describes video settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "VIDEO" from "Setup Menu". For the proce-
dure, see steps 1 to 3 in "Using the Setup Menu" on
page 23.
VIDEO

TV Screen

Display
Line1 Input
Line2 Input
E.B.L
Select ENTER Enter
SETUP End
TV Screen
You can select the TV screen size to suit the screen
image.
Select "TV Screen" and select screen size from the be-
low.
4:3 Pan&Scan
It displays a wide picture across the whole screen with
left and right edges automatically cut off.
4:3 LetterBox
Select this mode when connecting to a conventional
TV. When playing back a wide screen DVD disc, it dis-
plays a wide picture with black bands at the top and
bottom of screen.
16:9
Select this mode when connecting to a wide-screen
TV. A wide-screen picture is displayed in full size.
NOTE:
If the DVD disc is not formatted in the Pan&Scan for-
mat, it displays a 4:3 aspect ratio.
Display (Turning the screen display
"On" or "Off")
You can turn off the screen display that is output to the
TV screen by this unit. Select "Display" and select "On"
or "Off".
On: The screen display appears.
Off: Nothing but the Setup Menu and error messages
appear.
7/25/05, 23:19
4:3 Pan&Scan
4:3 LetterBox
16:9
RETURN Back