Audio - LG MDT355K Owner's Manual

AUDIO

2.1 Speaker Setup (MDT355K)
Make the following settings for the built-in 2.1
channel surrounds decoder.
1. Press SETUP.
2. Use U u to select AUDIO menu and then
press i .
3. Use U u to select [2.1 Speaker setup] menu
and then press ENTER.
4. Press ENTER
The [2.1 Speaker setup] appears.
5. Use I i to select the desired speaker.
6. Adjust options using U u I i buttons.
7. Press ENTER to confirm your selection.
Return to the previous menu.
Speaker selection
Select a speaker that you want to adjust.
NOTE
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
MDD105-A5U-ARUSLL-ENG.indd 21
Volume – Press I i to adjust the output level
of the selected speaker.
Test – Press I i to test the signals of each
speaker. Adjust the volume to match the
volume of test signals memorized in the
system.
DRC (Dynamic Range Control)
Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On]
for this effect.
Vocal
Select [On] to mix karaoke channels into
normal stereo.
This function is effective for multi-channel
karaoke DVDs only.
9
Installation 21
3
10. 07. 01 11:16