Table of Contents
Advertisement
22
Connecting
DISPLAY
TV Aspect
Select which screen aspect to use is based on the
shape of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
2
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
This displays a wide screen picture with black
bands at the top and bottom of the screen.
[Panscan]
This fills the entire 4:3 screen, cropping the
picture as necessary.
Progressive Scan
(For Component Video connections)
Selects whether the COMPONENT
VIDEO(PROGRESSIVE SCAN) OUT jacks output
progressive signal. If your TV accepts progressive
format signals, you will enjoy accurate color
reproduction and high quality image by selecting
[On]. If your TV does not accept progressive format
signals, select [Off ].
If you set Progressive Scan to [On] in error, you
must reset the unit. First, remove the disc from the
unit. Next, press and hold Z(STOP) for about five
seconds. The video output will be restored to the
standard setting, and a picture will be visible on
your TV.
DM5420K-FU.AUKRLLK_5068-ENG.indd 22
AUDIO
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
2012-07-12
12:03:06
Advertisement
Table of Contents
