Playback (DVD)
Marking desired scenes
DVD
VCD
The unit stores the points that you want to watch again up
to 3 points. You can resume playback from each scene.
1
Press MARKER during playback.
2
Select the blank Marker using ▲ or ▼.
Then press ENTER at the desired scene.
•
Repeat this procedure to set the other 2 scenes.
3
Press MARKER to clear this display.
■ Returning to the scenes
1) Press MARKER during playback or stop mode.
Press ▲ or ▼ to select the Marker 1-3.
2)
Press ENTER.
3)
•
Playback starts from the marked scene.
■ To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
Notes:
•
Some discs may not work with the marking operation.
•
The marking is canceled when you open the disc tray or turn
the power off.
•
Some subtitles recorded around the marker may fail to
appear.
•
In case of Video CD with PBC, Marker function is prohibited.
Repeat playback
DVD
VCD
1
Press PLAY MODE during playback or stop mode.
2
[DVD]
Press ▼ to select "Repeat".
Press ENTER repeatedly to select "Chapter" or "Title".
The unit automatically starts repeat playback after
finishing the current title or chapter.
[Video CD]
Press ▼ to select "Repeat".
Press ENTER repeatedly to select "Track" or "All".
The unit automatically starts repeat playback after
finishing the current track.
•
If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
[Audio CD and MP3/WMA/JPEG/DivX
Please see "Repeat playback (CD)"
3
Press PLAY MODE again to clear the screen.
■ To resume normal playback
Select Repeat : "Off" in step 2.
Notes:
•
Some discs may not work with the repeat operation.
•
In case of Video CD with PBC, Repeat function is
prohibited during playback.
•
Chapter/Track repeat function is canceled whenever
SKIP
or
is pressed.
34
2K60121A_En_P32-37.indd 34
2K60121A_En_P32-37.indd 34
A-B Repeat playback
DVD
VCD
CD
A-B repeat playback allows you to repeat a section between
two selected points.
1
Press A-B RPT during playback.
2
Press A-B RPT again.
■ To resume normal playback
Press A-B RPT again.
"
Notes:
•
In A-B Repeat mode, subtitles near the A or B locations may
not be displayed.
•
You may not be able to set A-B Repeat for the scenes that
include multiple angles.
•
A-B Repeat playback does not work when Repeat playback
is activated.
•
You may not be able to set A-B Repeat during certain
scenes of the DVD.
•
A-B Repeat does not work with an interactive DVD, MP3/
WMA/JPEG CD.
•
In case of Video CD with PBC, A-B Repeat is prohibited.
Program playback
VCD
You can arrange the playback order of tracks on the disc. This
feature works for Video CD.
For Audio CD and MP3/WMA/JPEG/Divx
"Program playback (CD)"
1
Press PLAY MODE during stop mode.
2
Press ▲/▼ to select "Mode", then press ENTER
repeatedly to select "Program".
3
Press ◀/▶ to select the programming position. Use
Number buttons (0–9) to input the track numbers.
4
Press ◀/▶ to return to the left column, then press ▲/▼
to select the "Program Playback" and press ENTER.
CD]
®
.
39
■ To change the program
1.
Select Mode to "Program" (as step 2), press ◀/▶/▲/▼ to select
the track number you want to change, then press CLEAR.
2.
Press Number buttons (0–9) to input the new track number.
■ To clear the program one by one
Select Mode to "Program", press ◀/▶/▲/▼ to select the track
number. Then press CLEAR.
■ To clear all the programs
At the left column, press ▲/▼ to select "Clear Program". Then
press ENTER.
Notes:
•
In playing back the Video CD with PBC, you cannot set
Program playback.
•
The program is canceled when you open the disc tray or
turn the power off.
•
The start point is selected.
•
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point and returns to Point A automatically, then
starts again.
" appears on the screen.
Off
®
.
40
•
If you input a wrong number, press CLEAR.
•
The programs you selected will start to playback
in order.
•
To resume normal playback, select Mode "Off" in
step 2.
CD, please see
1/12/2007 7:59:21 PM
1/12/2007 7:59:21 PM