Marking Desired Scenes; Marking The Scenes; Returning To The Scenes - Toshiba SD-V394 Owner's Manual

Advanced playback (DVD)

Marking desired scenes

The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.

Marking the scenes

DVD
VCD
1
Press MARKER during playback.
2 Select the blank Marker using C or D.
Then press ENTER at the desired scene.
• Repeat this procedure to set the
other 2 scenes.
3 Press MARKER to clear this display.
Notes:
•
Some discs may not work with the marking operation.
•
The marking is canceled when you open the disc tray or turn
the power off.
•
Some subtitles recorded around the marker may fail to
appear.
46
2I30101B-En_p46-49
Marker1
Marker2
Marker3
Marker1
00 27 54
Marker2
Marker3
46

Returning to the scenes

DVD
VCD
1
Press MARKER during playback or stop mode.
Marker1
Marker2
Marker3
2 Press C or D to select the Marker 1-3.
Marker1
Marker2
Marker3
Press ENTER.
3
Playback starts from the marked
scene.
To cancel the Marker
Follow the above steps 1~2, then press CLEAR.
1/12/06, 17:06
C/D
ENTER
CLEAR
MARKER
00 27 54
01
16 25
02 08 31
00 27 54
01 16 25
02
08 31