Stereo Recording And Playback - Toshiba SD-V395KC Owner's Manual

Recording (VCR)/Other functions (VCR)
To set daily/weekly timer
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MO-SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on page
At step 3, press SET + or – repeatedly until the desired
setting appears. Then press ENTER.
When you press SET – repeatedly, the DATE indicator will
change as follows, in this case the day is Friday.
The current day (Friday)
One month later minus
one day
WKL-WE
(Weekly Wednesday)
If the programs overlap another
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
If you set up many timer recording programs at the same
start time, the priority will be the top program in the timer
recording list.
8 : 00
Program 1
Program 2
Program 3
Recording
Control Settings
Notes:
• The daily/weekly recording can be made continuously until
the recording is canceled or the tape reaches the end.
• During timer recording the automatic rewinding mechanism
does not function.
To confirm or cancel a program
1
If the Timer has been activated, press TIMER REC to
deactivate the Timer.
• The timer symbol (
VCR DVD selector to change to VCR mode.
2
To confirm Timer program:
At step 1 on page
press ENTER.
• The timer program list will appear on the screen.
30
2K60121A.indb 30 2K60121A.indb 30
.
29
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-TH (Weekly Thursday)
DATE START END CH
WKL-WE
9 : 00 10 : 00
11 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.1 Prog.2 Prog.3
) will disappear. Then press
select "TIMER REC SET" and
29
3
To cancel Timer program:
Press SET + or – to select the unwanted program, then
press CANCEL to cancel the program.
4
Press VCR MENU repeatedly until the menu screen
is cleared.
Notes:
• If there are other timer record programs remaining, TIMER
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
• You cannot confirm the Timer program during timer
recording operation.
• You can correct or cancel a programmed setting in program
confirm mode.

Stereo recording and playback

Stereo recording and playback
The VHS Hi-Fi audio system permits high fidelity recording of
MTS STEREO TV broadcasts.
When a MTS STEREO broadcast is received, "STEREO"
will appear on the screen for about 4 seconds and the
program can be viewed or recorded in stereo.
The Hi-Fi stereo recording procedure is the same as for
normal recordings.
Note:
When using a Cable TV system, stereo TV programs may
be transmitted over a mono cable channel. In this case
"STEREO" will not appear and the sound will be in mono.
Output selection
When viewing an MTS stereo TV program, or playing a
prerecorded VHS Hi-Fi stereo videotape, press AUDIO
SELECT to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi stereo position,
this button can be set to the MONO position if the stereo
broadcast or videotape audio is of poor quality. The "R" and
"L" positions allow the audio from the Right or Left Hi-Fi
channel to be heard over both TV speakers. This button
has no effect when viewing a MONO videotape or TV
program. Each time when you press the button, OUTPUT
SELECTION display appears on the screen for several
seconds. Refer to the chart below.
OUTPUT SOUND HEARD ON BOTH
SELECTION SPEAKERS
STEREO STEREO
L ch LEFT CHANNEL AUDIO
R ch RIGHT CHANNEL AUDIO
MONO MONO
1/12/2007 3:50:13 PM 1/12/2007 3:50:13 PM