Connecting To An Amplifier Equipped With A Dolby Digital Decoder; Connecting To An Amplifier Equipped With Dolby Pro Logic Surround - Toshiba SD-P2000 Owner's Manual

Connections
Connecting to Optional Equipment (continued)

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the player to a 6 channel amplifier equipped with a
Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic
Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD
movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from
titles with the Dolby Surround mark.
Amplifier equipped with a
Dolby Digital decoder
To digital audio input
(optical/coaxial)

Connecting to an amplifier equipped with Dolby Pro Logic Surround

Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an
amplifier and speaker system (right and left front speakers, a center speaker, and one or
two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an
amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's
owner's manual and set the amplifier so you can enjoy Dolby Pro Logic
Surround sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
*
Dolby Pro Logic Surround
To analog audio input
(yellow)
72
AV IN AV OUT COMPONENT
VIDEO
To BITSTREAM/PCM
Digital cable (not supplied)
AV IN AV OUT COMPONENT
VIDEO
To AV OUT
Audio/video cable (supplied)
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby
Laboratories. Confidential unpublished
works. ©1992-1997 Dolby Laboratories.
All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display
S VIDEO
BITSTREAM/PCM
"Audio Out Select"
Recording system
• Make the following setting.
On-screen display
"Audio Out Select"
Be sure to set "Audio Out Select"
to "Bitstream" or "PCM" when
you enjoy sounds of Dolby Pro
Logic Surround using this
connection.
* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
S VIDEO
BITSTREAM/PCM
Select: Page
56
"Bitstream"
59
D 39
Select: Page
"Bitstream"
56
or
59
"PCM"