Power Connection - Toshiba SD-P2000 Owner's Manual

Introduction

Power Connection

Connect the supplied AC adapter to power the player.
For outdoor use, the battery pack (supplied) is also available.
When using the battery pack, follow the instructions on page
Caution
• Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire
or electric shock.
• Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock.
• Do not use an AC adapter other than one specified, as it can cause a fire or damage to the player.
• When the AC adapter is in use, its temperature may increase. However, it is not a malfunction. Make sure that the
power cord is disconnected and the temperature decreases before carrying it.
AV IN
20
AV OUT COMPONENT
VIDEO
Follow steps 1 to 3 to connect.
When disconnecting, reverse this order.
To wall outlet
3
Power plug
.
75
BATTERY
S VIDEO
BITSTREAM/PCM
1
AC adapter
Connect the supplied AC adapter
and the power cord firmly.
Power cord
DC IN 12V
To the DC inlet
2