Loading A Battery; Operating With The Remote Control - Toshiba SD-P2000 Owner's Manual

Loading a battery

1
While pushing the holder in direction
1 1 1 1 1 , simultaneously slide it out in
direction 2 2 2 2 . 2
Backside
2
Place a coin-shaped battery (CR2025)
with the side up on the holder.
Keep the holder horizontal so that the battery
does not fall through.
3
Push the holder back into its
receptacle.
Backside
Notes on coin-shaped batteries
• If the remote control does not function correctly or if the
operating range becomes reduced, replace the battery
with new one.
• See for safety use of coin-shaped batteries.
8
1
2

Operating with the remote control

Point the remote control at the remote
sensor and press the buttons.
Distance: About 3 m (9.9 feet) from the front of the
remote sensor
Angle: About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the player to a
strong light source such as direct sunlight or other
illumination. If you do so, you may not be able to
operate the player via the remote control.
Notes on the remote control
• Direct the remote control at the remote sensor of the
player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid place.
• Do not spill water or put anything wet on the remote
control.
• Do not open the remote control.
30°
30°
Within about 3 m (9.9 feet)
19