Connecting To A Tv - Toshiba SD-P1500 Owner's Manual

Connections

Connecting to a TV

Connect the player to a TV to view playback pictures. For details of output sound, see
S video cable (supplied)
To S video input
TV
When using an S video cable, do not connect the
yellow (composite) video cable.
On the setting
• Set the "TV Shape" according to the aspect ratio of your TV.
• Set the "Audio Out Select" to "Analog 2ch".
• When you set the "LCD Picture" to "Fine", close the LCD or press the LCD MODE button on the main unit to turn the LCD
monitor off.
23 46
INTERLACED outputs/inputs (ColorStream
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher
quality picture playback.
Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, C
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
Notes
• Refer to the owner's manual of the connected TV (or other equipment) as well.
• When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
• If you place the player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the player
away from the tuner and radio.
• The output sound of the player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
56
To S VIDEO
AV IN AV OUT COMPONENT
VIDEO
To AV OUT
Audio/video cable
(supplied)
(yellow) (white) (red)
To video input To audio input
44 47
® )
BATTERY
S VIDEO
BITSTREAM/PCM
To COMPONENT VIDEO
Component video cable
(supplied)
TV equipped
with
component
video inputs
• To obtain sound output from the AV OUT connector, as
in the left figure, connect the red and white plugs of the
supplied audio/video cable to your TV's audio inputs.
• Pictures cannot be viewed if you are using the player
with the battery pack. Use the AC adapter.
44 46
39 .
Signal flow
DC IN 12V
To C To C To Y
R B
, C
B
)
R