Siemens SIMATIC SFP Series Operating Instructions Manual page 44

Approvals
You will find the EC declaration of conformity for these products on the Internet pages of
Siemens Industry Online Support
cert).
The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Division Process Industries and Drives
Process Automation
DE-76181 Karlsruhe
Germany
Machinery directive
The product is a component in compliance with the EC Machinery Directive 2006/42//EEC.
According to the machinery directive, we are obliged to point out that the product described is
intended solely for installation in a machine.
Before the final product can be put into operation, it must be tested to ensure that it conforms
with the directive 2006/42/EEC.
Note
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is therefore
no declaration of conformity relating to the EC Machinery Directive 2006/42/EEC for this
product.
ATEX (explosion protection directive)
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that
the associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subasseblies/modules in a Zone 2 Hazardous
Area".
You will find this document
● on the data medium that ships with some devices.
● on the Internet pages of Siemens Industry Online Support
Enter the document identification number C234 as the search term.
The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment
and Protective Devices for Use in Potentially Explosive Atmospheres". and as of 20.04.2016
the EC directive 2014/34/EU.
ATEX classification:
II 3 G Ex nA IIC T4 Gc
44
WARNING
support.industry.siemens.com/cs/ww/en/ps).
(https://support.industry.siemens.com/cs/ww/en/ps/15273/
Operating Instructions, 12/2017, A5E02630804-11
(https://
Transceiver SFP/SFP+/SCP/STP