Siemens SIMATIC SFP Series Operating Instructions Manual page 19

Note
Plugging and pulling during operation
The pluggable transceivers can be plugged and pulled during operation. If you have questions
on the use of SIMATIC NET products, please contact your Siemens sales partner.
Notes on SCALANCE XM-400
Note
SCP / STP transceivers can only be used in the SCP / STP slots of the SCALANCE XM408-4C.
Notes on SCALANCE W:
Note
With a SCALANCE W786-2, do not plug or pull an SFP transceiver during operation!
If you have questions on the use of SIMATIC NET products, please contact your Siemens
sales partner.
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 12/2017, A5E02630804-11
4.3 Notes on installation of SCP / STP transceivers
Assembling
19