Siemens SIMATIC SFP Series Operating Instructions Manual page 22

Uninstalling
5.2 Removing a pluggable transceiver (SCP/STP)
Procedure
Figure 5-1
Follow the steps below to remove a pluggable transceiver:
1. Remove the connecting cable of the pluggable transceiver.
2. Press the spring in the transceiver slot to the right using a screwdriver, see figure.
The transceiver is pushed part of the way out of the transceiver slot.
3. Remove the pluggable transceiver from the pluggable transceiver slot.
Note
Do not use force
It must be possible to remove the pluggable transceiver easily and without applying any
force.
4. Fit a sealing plug to the pluggable transceiver.
22
Removing a pluggable transceiver
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 12/2017, A5E02630804-11