Connections
Connecting to a TV
Connect the DVD video player to your TV.
Connecting to a TV
Signal flow
To S
(red)
VIDEO
OUT
To AUDIO
OUT
S video cable (not supplied)
Notes:
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable
adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
14
2C01501A P14-17
(white)
(yellow)
To VIDEO
OUT
Audio/video cable (supplied)
If the TV has an S video input,
connect the DVD video player with
an S video cable. When using an
S video cable, do not connect the
yellow video cable.
Set the COMPONENT/S-VIDEO
selector switch to the S-VIDEO
position.
14
To wall outlet
To video input
To audio inputs
(red)
(white)
To S video input
TV or monitor with
audio/video inputs
12/16/03, 19:58
(yellow)