Table of Contents
Advertisement
2- AND 4-PORT SERVSWITCH—DT BASIC WITH AUDIO
4. Using your speakers' attached audio cable, connect the 3.5-mm male plug to
the console Audio port (noted by the Audio symbol) on the ServSwitch unit's
back panel. Then connect your microphone's attached audio cable to the
console's Microphone port (noted by the Microphone symbol) on the
ServSwitch unit's back panel. See Figure 3-1.
4-Port ServSwitch—
DT Basic with Audio
(KV7005A)
Figure 3-1. Console monitor, keyboard, mouse, and audio connections.
3.2.2 P
O
OWERING
Connect the 9-V, 600-mA power adapter's barrel connector to the power jack on
the rear of the switch. Then plug the power adapter cable into an available power
outlet. See Figure 3-2.
12
Speakers
S
S
N THE
ERV
WITCH
Figure 3-2. Power connections.
Microphone
(O
)
PTIONAL
9-V, 600-mA
power
adapter
Keyboard
Monitor
Mouse
Advertisement
Table of Contents
