Overview; Introduction - Black Box KV7004A Manual

2-and 4-port servswitch-dt basic with audio
Hide thumbs Also See for KV7004A:
Table of Contents

Advertisement

CHAPTER 2: Overview

2. Overview

2.1 Introduction

The 2- or 4-Port ServSwitch™—DT Basic with Audio allows you to control up to
two or four computers from a single HD15 console (keyboard, mouse, and
monitor). Supported mice include Microsoft
®
IntelliMouse
®
and other mice.
The compact and portable ServSwitch works with common operating systems,
including Windows 95/98/Me/2000/XP and Windows NT.
Setup is fast and simple, and there's no software to configure. It fits neatly on your
desktop. And the ServSwitch works with a specially designed cable. (A 3-in-1
connector on the EHN70045 cable incorporates one HD15 and two 6-pin mini-
DIN circuitry into a single HD15 connector. This connector attaches to an HD15
connector on the ServSwitch.)
Use either top-panel buttons on the ServSwitch or hotkeys on your keyboard to
select ports or start AutoScan. The top-panel buttons include integral LEDs. The
LED will light with the corresponding active port when manually switching
between the computers. The AutoScan function allows you to automatically scan
and monitor all computers, one by one, that are connected to the ServSwitch.
The ServSwitch supports video resolutions of up to 2048 x 1536.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kv7005a

Table of Contents