Sony RMT-P1BT Help Manual page 8

Help Guide
Remote Commander
RMT-P1BT
Connecting the Remote Commander and a camera with the Bluetooth
Connect the Remote Commander and a camera with the Bluetooth function.
Before connecting the Remote Commander and a camera with the Bluetooth function, you must pair them together
(device registration).
Note
The following is an example of a procedure for Sony Interchangeable Lens Digital Cameras and Sony digital still cameras.
Before you start, check that the Remote Commander's LOCK switch is in the position to the opposite of "LOCK."
On the camera, select MENU →
1
On the camera, select MENU →
2
If the pairing screen appears on the camera's screen, proceed to step
On the camera, select MENU →
3
On the Remote Commander, press and hold the Shutter-release/REC button (
4
button (either the + button (
When a confirmation message appears on the camera's screen, select [OK].
5
appears and pairing begins.
When pairing is complete, [Paired.] appears.
Note
If pairing fails, the Remote Commander's indicator flashes rapidly. If this happens, redo the procedure from the beginning.
(network) → [Bluetooth Settings] → [Bluetooth Function] → [On].
(network) → [Bluetooth Rmt Ctrl] → [On].
(network) → [Bluetooth Settings] → [Pairing].
) or the - button ( )) at the same time for at least 7 seconds.
8
®
function
.
) and the Focus/Zoom