TP-Link TL-SG1024DE Installation Manual page 7

The front panel of TL-SG1024DE is shown as the following figure.
Figure 1-2 Front Panel of TL-SG1024DE
LEDs
LEDs
LED Status
On
Power
Off
On
Link/Act
Flashing
Off
On
1000Mbps
Off
Reset
Press this button for five seconds or above to reset the software setting back to
factory default settings.
10/100/1000Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding Link/Act LED and a 1000Mbps LED.
The front panel of TL-SG1016PE is shown as the following figure.
Figure 1-3 Front Panel of TL-SG1016PE
Reset 10/100/1000Mbps RJ45 Port
Indication
The switch is powered on.
The switch is powered off or power supply is abnormal.
There is a device linked to the corresponding port but no
activity.
The corresponding port is transmitting or receiving data.
There is no device linked to the corresponding port.
A 1000Mbps device is connected to the corresponding port.
A 10/100Mbps device or no device is connected to the
corresponding port.
LEDs Reset 10/100/1000Mbps RJ45 Port
16/24-Port Gigabit Easy Smart Switch
Introduction 02