Advertisement
Universal radio-control transmitter 2
GIRA
Info
Installation Instructions
Installation and adjustment
Depending on wiring and on the selected mode of
operation, the universal radio-control transmitter
transmits radio telegrams, e.g.:
„channel 1 = switch on".
Connect the wires as follows:
E1:
input 1 (grey)
E2:
input 2 (brown)
N:
N conductor (blue)
L:
phase conductor (black)
Modes of operation
The universal radio-control transmitter has 4 modes
of operation which can be selected or indicated with
pushbutton
. The modes are signalled by the LED
as follows:
A) 2-channel dimming, toggling (E1 and E2)
1 brief flashes per second for 5 s altogether
B) 2-channel switching (E1 and E2)
2 brief flash per second for 5 s altogether
C) 1- channel dimming (E1/E2)
3 brief flashes per second for 5 s altogether
D) 1- channel blind/shutter (E1/E2)
4 brief flashes per second for 5 s altogether
Indicating actual mode of operation
To indicate the actual mode of operation, depress
pushbutton
briefly (< 0,5 s). The mode in which the
device is actually operating is then signalled by the
LED.
Changing the modes of operation
Depress pushbutton
press of the button, the universal transmitter changes
between A, B, C and D.
Wait until signalling has ended before pressing the
pushbutton again.
D)
Antenne
E1
E2
N
L
GY
BU
BK
BN
Universal radio-control transmitter 2
for at least 1 s. With each long
C)
E1
E2
GY
BN
GY
BN
BU
BK
E)
(A)
(B)
(C)
(D)
0
1
2
Mode A: 2-channel dimming, toggling (E1 and E2)
For independent control of two radio-control dimming
actuators.
Connection of conventional pushbuttons (n.o. con-
tacts):
A press on the button switches over (toggles) the type
of telegram from the transmitter:
brief press (< 1s):
long press (> 1 s):
F)
N L
E1
T1
GY
T2
2/06
Antenne
N
L
BU
BK
3
4
5
t [s]
switching on / off
lamp brighter / darker
Antenne
E2
N
L
BN
BU
BK
Page 2 of 5
Advertisement
